$18 for iPhone 6 Digitizer Screen Replacement Black - Ayake 4.7'' Fu Cell Phones Accessories Accessories for iPhone 6 Digitizer Screen New product!! Replacement Ayake 4.7'' Fu - Black for iPhone 6 Digitizer Screen New product!! Replacement Ayake 4.7'' Fu - Black $18 for iPhone 6 Digitizer Screen Replacement Black - Ayake 4.7'' Fu Cell Phones Accessories Accessories Replacement,4.7'',Cell Phones Accessories , Accessories,iPhone,Digitizer,-,6,Screen,/design/haworth-design-workspaces-office-wellbeing-architonic-10-22-2021/,Fu,for,Ayake,Black,$18,siamandas.com Replacement,4.7'',Cell Phones Accessories , Accessories,iPhone,Digitizer,-,6,Screen,/design/haworth-design-workspaces-office-wellbeing-architonic-10-22-2021/,Fu,for,Ayake,Black,$18,siamandas.com

for iPhone 6 Digitizer Screen New product Replacement Ayake 4.7'' Fu Limited Special Price - Black

for iPhone 6 Digitizer Screen Replacement Black - Ayake 4.7'' Fu

$18

for iPhone 6 Digitizer Screen Replacement Black - Ayake 4.7'' Fu


Product Description

We are specialize in cellphone parts

For iPhone 6 LCD Screen and Digitizer Full Assembly - Fix Kit (Top Quality Replacement)

Color: Black

Compatibility: This part will only compatible with an iPhone 6, but not an iPhone 6 Plus, 6s or 6s Plus. Please make sure you identify your iPhone correctly before purchase.

Note:

- This part includes the home button, front facing camera, earpiece speaker, and the LCD shield plate.

- You will not need to transfer these parts from your old display assembly to your new part.

- Important: The Touch ID function will only work with your phone's original home button assembly. You will need to transfer the button assembly from your old display to retain Touch ID.

Package includes:

- 1 x New LCD Screen and Digitizer for iPhone 6

- 2 x Spudger

- 1 x Pentalobe 5-point screwdriver

- 1 x Phillips #000 screwdriver

- 2 x Plastic opening tool

- 1 x Small Suction Cup

Step 1: Power off and disassemble screen




A. Power off your iPhone before beginning disassembly.

B. Remove the two 3.6 mm Pentalobe screws next to the Lightning connector.

C. Using a suction cup and plastic opening tool, gently pry the rear case down away from display.

D. Open the iPhone by swinging the home button end of the front panel assembly away from the
rear case, using the top of the phone as a hinge.

Note: Don't open the display to over 90º angle or the connectors might be damaged.

Step 2: Disconnect battery cable



A. Remove the following Phillips screws from the battery connector bracket:

  • One 2.2 mm screw
  • One 3.2 mm screw
B. Remove the metal battery connector bracket from the iPhone.

C. Use a plastic opening tool to gently pry the battery connector up from its socket on the logic
board.

Note: Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

Step 3: Remove the front panel assembly, and swap the home button if you want to keep the touch ID function

A. Remove the screws securing the cable bracket.

B. Remove the panel cable bracket from the logic board.

C. Disconnect the camera and sensor connector, home button connector, display connector.

A. Remove the screws securing the home button bracket.

B. Remove the home button bracket from the front panel.

C. Disconnect the home button cable connector.

FAQ:

1. Screen is blank/not lighting up/has white lines after installed

-If the screen is not able to be turned on, it is mainly because of the LCD connector did not fully installed or got loose. When this happened, lease try reinstalling the connectors for several times. After installed the screen, please press the power button and the home button for 10 seconds to reset the screen.

-When installing your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, please simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

2. Screen has been installed and worked fine for a few days/weeks, but the touch function is not working well

-This is because the digitizer cable might lose connection if not plugged in firmly, you can transfer the foam that attaches to the back of original digitizer cable connector onto the new one, which can make sure the connector stays connecting to the logic board.

-The second reason causing the touch function not working might be the battery. Please check whether the battery is swollen or not. If yes, it is probably that the digitizer cable connector will be loosen after the screen is assembled. Furthermore, a swollen battery has a high possibility to cause overheat or explosion. Therefore, we would highly recommend you to replace your battery under this circumstance.

3. The front facing camera does not work

-The front facing camera has a connector connecting to the logic board. Please make sure it is fully connected. You will also need to re-power the phone to active the function of the front facing camera.

4. The home button does not work

-The home button needs to be connected to the metal plate and then the cable on the metal plate needs to be installed to the logic board. Please make sure both connectors are fully fitted and please gently install the connectors.to avoid any damage on the connector.

for iPhone 6 Digitizer Screen Replacement Black - Ayake 4.7'' Fu